主要功能特点：
　　 用于测量摩托车排放废气中的HC及CO气体浓度，采用国外先进技术，进口关键零部件组装而成。具有高亮度数码显示，自动校零，自动数据线性化处理，气路阻塞时自动报警，故障时自动诊断所在单元，打印测试之日期、时间功能，配内置打印机（或模拟输出接口或RS－232A数字串行通信接口），可进行自由怠速和双怠速测量，具有操作方便，测量数据准确，工作稳定可靠等特点。
主要技术参数：

测量气体范围	HC：0～20000ppmvol
	CO:0～10%vol
准确性	HC±5%(相对误差)±12PPmvol(绝对误差)
	CO±5%(相对误差)±0.06%vol (绝对误差)
稳定性	自动校零，量矩漂移≤±3%
重复性	重复误差≤±2%
分辨力	HC：10ppmvol
	CO:0.01%vol
响应时间	95%响应不大于10秒
输出方式	数字直读显示，可附打印机打印气体名称，浓度最大值，测试时间、日期等。可附接口与计算机联网
环境条件	温度0～40℃，相对湿度≤90%
电源	AC100-240v  50Hz 或（选加电源逆变器）消耗功率50VA
外形尺寸	420mm(长)×310mm(宽)×170mm(高)
重量	约9kg

Main Features:

Motorcycles used to measure emissions of HC and CO gas concentrations, using advanced foreign technology, import the key components assembled. With a high-brightness digital display, automatic zero, linear automatic data processing, auto-alarm when the gas line blocking, fault diagnosis where the unit automatically and print testing date, time functions, with built-in printer (or the analog output interface or RS -232A digital serial communication interface), can be freely idling and dual idling measure, with convenient operation, accurate measurement data, work stable and reliable characteristics.

Main technical parameters:

Test gas Scope：HC：0～20000ppmvol

CO:0～10%vol
Accuracy： HC ± 12ppmvol (absolute error)± 5% (relative error)         

CO± 0.06% vol (absolute error) ± 5% (relative error)

Stability：Automatic zero, volume moments drift ≤ ± 3%
Repeatability：Repeat error ≤ ± 2%
Resolution： HC：10ppmvol

CO：0.01%vol
Response Time：95% of the response to no more than 10 seconds
Warm-up Time：About 20 minutes
Output Mode：Digital direct-reading show that gases can be attached printer name, the

 concentration maximum, average and minimum test time, date, etc.. Can be  attached to interface with the computer network

Environmental conditions：Temperature 0 ~ 40 ℃, relative humidity ≤ 90%
Power：AC100-240v  50Hz or DC12V (select plus power inverter) Power

consumption 50VA
Dimensions：420mm (length) × 310mm (width) × 170mm (H)
Weight：About 9kg